China Fpic High Precision Molding Inject Plastic Injection Molding Mold Customized PA Nylon Plastic Part automotive injection molded parts

Product Description

FPIC high precision molding inject plastic injection molding mold customized PA nylon plastic part

We, HangZhou Forman Precision Industry Co., Ltd, provide one- stoped Custom Automotive Components solution. Mainly offer custom automotive connectors, precision plastic injection molding parts, Stamped Metal Parts etc. 

Product Description

Product Name  FPIC high precision molding inject plastic injection molding mold customized PA nylon plastic part
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

Custom Plastic Injection Molding Parts is 1 of our main production line. We have supplied our plastic moulding parts to Audi, Ford, VW etc for years. 

If you have any demand for custom plastic parts, just send your drawing and detailed requirements to us , you will get the response ASAP. Just Try it.  Thank you in advance. 

Ahout Forman

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:

Our Office:

Our Workshp:

Quality Assurance

In order to Control the product quality in the whole process, FPIC built itsself lab equiped with kinds of professional inspection and testing machine. In this lab, we could in Salt spray resistance test ,tensile test,intersection detection, coating thicknessinspection and so on. Before delivered, all the products should be detected by CCD 100%,to insure its high performance.

Certification & Honor

1999    Founded
2004    ISO9001:2008 Certified
2005    Became  USB Association Member
2006    First Full- Automatic Assembly Line
2013    ISO14001 Certified
2016    IATF 16949 Certified

Exhibition

Shipping

Regards to Shipping , it is up to you. By Express , By Air, By Sea, By Train, By Truck etc . 

FAQ

Q: Are you trading company or manufacturer?
 A: We are factory, so we can provide competitive price for you.
 
 Q: What kind of products can you provide?
 A: Our company (FPIC) can provide OEM/ODM spare parts. We are an experienced OEM / ODM business, focusing on tooling and mass production of Stamping parts, Injection-molded plastic parts and Insert-molding components .
 
 Q: What’s kinds of information you need for a quote?
 A: In order to quote for you earlier, please provide us the details together with your inquiry.
 1. 3D drawings (STEP, CAD, SOLID Works, PROE, DXF and PDF)
 2. Material requirement (include contact material and insulation material.)
 3. Surface treatment 
 4. Quantity  or Consumption (per order/ per month/ annual)
 5. Any special demands or requirements, such as packing, labels, delivery, etc.
 
 Q: What shall we do if we do not have drawings?
 A: Please send your sample to our factory, then we can copy or provide you better solutions. Please send us pictures or drafts with dimensions (Thickness, Length, Height, Width), CAD or 3D file will be made for you if placed order.
 
 Q: What makes you different from others?
 A.1. Our know-how R&D team with 14 member who all have rich professional knowledge and experience about connectors
    2. Automated production equipment and matched quality testing equipment. 

 Q: Is it possible to know how are my products going on without visiting your company?
 A: We will offer a detailed production schedule and send weekly reports with photos or videos which show the machining progress.
 
 Q: Can I have a trial order or samples only for several pieces?
 A: As the product is customized and need to be produced, we will charge sample cost, but if the sample is not more expensive, we
will refund the sample cost after you placed mass orders.

Thank you very much for your patience . Any demand , just send your drawing and detailed requirements for our further confirmation. 

Have a nice day!

US $0.01-1
/ Piece
|
100 Pieces

(Min. Order)

###

Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Raw Material: PA6t + 30% G.F
Color: Black
Operating Temperature: -40 to +105

###

Customization:

###

Product Name  FPIC high precision molding inject plastic injection molding mold customized PA nylon plastic part
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

###

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:
US $0.01-1
/ Piece
|
100 Pieces

(Min. Order)

###

Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Raw Material: PA6t + 30% G.F
Color: Black
Operating Temperature: -40 to +105

###

Customization:

###

Product Name  FPIC high precision molding inject plastic injection molding mold customized PA nylon plastic part
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

###

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:

Designing Injection Molded Parts

Designing injection molded parts involves careful consideration of various parameters, including the wall thickness and draft angle. These factors are essential for a strong, durable part. Improper wall thickness can lead to sinking and warping defects. To avoid these issues, ensure that the walls of your injection-molded parts have a uniform thickness that does not vary too much from the rest of the part.

Designing out sharp corners in injection molded parts

Injection molded parttWhen designing an injection molded part, it’s important to consider the corner radius. Sharp corners will create more stress, and this will lead to weak spots and cracks. Creating a radius around the corner helps distribute stress evenly and allows easier material flow and part ejection. Additionally, sharp corners in a mold can collect contaminants and create defects, including surface delamination.
Sharp corners in injection molded parts are a common source of stress and can cause the part to become damaged during the manufacturing process. In addition to trapping air, sharp corners may also lead to localized high temperatures that degrade the part. To reduce these risks, consider adding radii to all sharp corners.
Another important design factor to consider is wall thickness. Parts that have a smooth transition between sections should be designed with a minimum of five millimeters of wall thickness. Anything thicker will increase production cycle time and may also negatively impact mechanical properties. The use of fillets and chamfers can also help avoid these problems.
Designing out sharp corners in injection molded components can prevent costly problems from occurring during the manufacturing process. While the process is simple and straightforward, it needs to be done correctly to ensure quality. By following best practices, designers can ensure their parts won’t develop any problems or sink, warp, or voids. A poor design can also cause damage to the mold, which can cost thousands of dollars and hundreds of hours to redesign.
When designing injection molded parts, designers should consider the following guidelines. Incorporate internal and external radiuses. The internal radius (also called a fillet radius) is designed into the mold for improved quality and strength during the molding process. This radius is typically located on the inside corners or the bottom of a compartment. It can also be used for connecting walls and ribs. An external radius, on the other hand, is known as a round radius.
A right-angled part with sharp corners has a tendency to be loaded by pushing the vertical wall to the left. This creates a high-level of molded-in stress in the part. The resulting part may be weaker than expected because of the increased stress on the corner.

Importance of uniform wall thickness

Uniform wall thickness is a critical factor when designing injection-molded parts. This ensures that molten polymers can flow efficiently throughout the part. Additionally, it facilitates ideal processing. Varying wall thickness can cause problems during molding, such as air trapping, unbalanced filling, and weld lines. To ensure that your injection-molded parts are uniform, consult a plastic injection molding company that specializes in uniform wall thickness.
Injection-molded parts are more durable when the walls are uniform. A thin wall reduces the volume of material used in the part. However, thin walls can break during ejection. In addition, thin walls increase the possibility of voids. To prevent such problems, use larger machines that can produce parts with uniform wall thickness. This way, parts are easier to handle and ship.
Another important factor is the presence of gussets. These are support structures that stick out from a part’s surface. Gussets are useful for preventing warping, because they provide rigidity to thin unsupported sections. For this reason, gussets are essential when designing an injection-molded part.
Uniform wall thickness is especially critical in parts that have bends or rims. A uniform thickness helps maintain the mechanical strength and appearance of a part. However, this can be tricky as you may need to balance optical properties with mechanical ones. At Providence, we have the experience to help you navigate these challenges and produce quality parts.
Proper wall thickness is important for many reasons. It can affect both cost and production speed. The minimum wall thickness for injection molded parts depends on the part size, structural requirements, and flow behavior of the resin. Typically, injection molded parts have walls that are 2mm to 4mm thick. However, thin wall injection molding produces parts with walls as thin as 0.5mm. If you’re having trouble choosing the right wall thickness, consult an experienced injection molding company that can help you determine the appropriate wall thickness for your part.
Uneven wall thickness causes problems during injection molding. The uneven wall thickness may make the material flow through the part too quickly, or it may cause it to cool too slowly. This can lead to warping, twisting, or cracks. Even worse, uneven wall thickness can cause parts to become permanently damaged when they are ejected from the mold.

Importance of draft angle

Injection molded parttDraft angles are an important part of design for injection molded parts. These angles are necessary because friction occurs on surfaces that come into contact with the mold during the molding process. A part with a simple geometry would only require a single degree of draft, but larger parts would need at least two degrees.
Almost all parts requiring injection molding will require some amount of draft. The better the draft, the less likely the parts will have a poor finish and may bend or break. Furthermore, parts with inadequate draft will take longer to cool, extending cycle times. Moreover, if the parts are too thick or have too little draft, they may become warped.
Having a draft angle in injection molding is very important, especially if the mold has sharp corners. Without it, parts will come out scratched and will shorten the life of the mold. In some cases, parts may even not be able to eject from the mold at all. To prevent this, air needs to be allowed to get between the plastic and metal. This allows air to escape and prevents warping during ejection.
The importance of draft angle is often overlooked in the design process. Adding this angle to the mold can help prevent problems with mold release and reduce production costs. A draft angle will also allow parts to release from the mold more easily and will lead to better cosmetic finishes and fewer rejected parts. Additionally, it will reduce the need for costly elaborate ejection setups.
Draft angle should be added to the design as early as possible. It’s crucial for the success of the injection molding process, so it is best to incorporate it early in the design process. Even 3D printed parts can benefit from this detail. The size of the draft angle is also important, especially for core surfaces.
A draft angle can be large or small. The larger the draft angle, the easier it is to release the mold after the mold is completed. However, if the draft angle is too small, it can lead to scrapes on the edges or large ejector pin marks. Draft angles that are too small can lead to cracks and increase mold expenses.

Cost

Injection molded parttThere are many factors that contribute to the cost of injection-molded parts, including the material used for the mold and the complexity of the design. For example, larger parts will require a larger injection mold, which will cost more to manufacture. Additionally, more complex parts may require a mold with special features. Mold makers can advise you on how to design your part in order to reduce the overall cost of an injection-molded part.
One of the biggest costs related to the production of injection molded parts is the cost of the tooling. Tooling costs can reach $1,000 or more, depending on the design, materials, and finishing options. Tooling costs are less if the part quantity is small and repeatable. Higher part volumes may require a new mold and tooling.
Injection-molded parts’ cost depends on the material used and the price of procuring the material. The type of material also influences how long the part will last. Plastics that contain high percentages of glass fibers are abrasive and can damage an injection mold. Therefore, they are more expensive but may not be necessary for certain applications. Additionally, the material’s thermal properties may also affect the cycle time.
Mold size is another factor that impacts the cost. Larger molds require more CNC machinery and building space than smaller molds. Additionally, the complexity of the part will also impact the cost. Injection molds with sharp corners and complex ribs will cost more than small injection molds without intricate designs.
Injection molding is a complex process that requires a variety of moving parts. During the process, a critical piece of equipment is the injection die. This machine is a large part of the process, and comes in different sizes and shapes. Its purpose is to accept the hot plastic and machine it to extremely precise tolerances.
If your project requires a complex product with a high degree of complexity, injection molding is an excellent choice. It is ideal for initial product development, crowdfunding campaigns, and on-demand production. Mold modifications can also lower the cost of injection molding.
China Fpic High Precision Molding Inject Plastic Injection Molding Mold Customized PA Nylon Plastic Part     automotive injection molded partsChina Fpic High Precision Molding Inject Plastic Injection Molding Mold Customized PA Nylon Plastic Part     automotive injection molded parts
editor by czh 2022-12-07